Homemade power supply
Homemade power supply |
![]() If you do not have a set of fresh batteries at hand, you can make a homemade power supply. To do this you will need two carbon rods from an old battery, two woven bags of diameters of 20 ... 25 mm and a height of 60 mm. In them, the rods are installed and filled with activated carbon (crushed medical tablets). The following solution is used as an electrolyte: in 1 liter of water, dissolve 5 tablespoons of table salt, 2 g of boric acid and 3 g of sugar. The walls of the glass jar should be painted with black paint. The power supply will give a voltage of 1.5 V. |
Comments
Commenting on, remember that the content and tone of your message can hurt the feelings of real people, show respect and tolerance to your interlocutors even if you do not share their opinion, your behavior in the conditions of freedom of expression and anonymity provided by the Internet, changes Not only virtual, but also the real world. All comments are hidden from the index, spam is controlled.