So far, only in English.
1.1.2 Jailbreak (Updated)
**** NOTE: This method currently requires you on 1.1.1 of the firmware.
If you are on 1.1.2 you must downgrade prior to being able to use
1.1.2-jailbreak.zip [ 
] [ 
] [ 
] ****
Updates:
- Activation / YouTube for iPhones
- Added an automatic fix for SpringBoard crash problem on touches
- PPC support
- Some improvements to crossplatform compatibility
Step 1: Downgrade to 1.1.1 (if required)
*** NOTE: This guide does not guarantee it will work 100%. Also errors 1015 is expected at the end of the process. Continue reading to understand. ***
1. Download the 1.1.1 ipsw firmware file from Apple. If the download file has the extension ".zip", please remove it and modify it to the up with a filename ending in _Restore.ipsw
2. Reboot your iPhone holding the top (power) and home buttons BUT release the top button 10 seconds into it (right after the screen goes dark) and continue to hold the home button until iTunes detects the phone in recovery mode. The iPhone screen will appear to be off, but start iTunes if not started yet.
3. Restore your iPhone by pressing and holding the 'Shift' key on the windows or 'option' key on Mac, then click 'restore' to select the 1.1.1 firmware file you downloaded earlier. 101. However you will notice that the iphone is in DFU mode with the connect to itunes screen from 1.1.1.
4. In order to kick the phone out of that mode, start TouchFree by double-clicking "windows.bat" on Windows or "jailbreak.jar" in OS X, then click the "Boot from Recovery" button.
-------------------------------------------------- --------------------------------------------------
Step 2a: Jailbreak 1.1.1 on Unactivated iPhone
*** NOTE: If your phone has been activated through iTunes, you can proceed to step 2b. ***
1. enter * # 307 # press call, now use the back button. # 307 #, now enter 0, press call, press answer, press hold, press decline. And you get to the contact list. And thereafter every time you push the homebutton you just slide the "emergency call" slide, then enter 0, press call, press hold, press decline.
2. Push contacts, end call and you get called again, this time.
3. Now edit a new contact and type in "prefs: // 11" as web-address and " http://jailbreakme.com " as an additional URL.
4. When you tap "prefs: // 11" you can now select your favorite WiFi gateway.
5. Now press the home button and move the slider to the dial-pad.
6. Now you can go back to the contact list by Dialing 0, push call, then answer, then contacts, then hit the " http://jailbreakme.com " web address you typed in.
7. Scroll down to the bottom, click "Install AppSnapp". Safari will exit and you'll return to your springboard. Wait for the phone to reboot. You are now jailbroken. And are able to use Installer.app.
-------------------------------------------------- --------------------------------------------------
Step 2b: Jailbreaking on iPod Touch or iTunes Activated iPhone
1. Launch Safari
2. Visit http://jailbreakme.com , Scroll down to the bottom, click "Install AppSnapp". Safari will exit and you'll return to your springboard. Slide to unlock, you are now jailbroken. And are able to use Installer.app.
-------------------------------------------------- --------------------------------------------------
Step 3: Prepare your 1.1.1 device for the Update
1. Launch Installer.app
2. Scroll down to Tweaks (1.1.1)
3. Select OktoPrep
4. Click Install
-------------------------------------------------- --------------------------------------------------
Step 3b: Prevent SpringBoard crash on previous hacked iPod touches
If you have installed MobileMail on your iPod touch, there is a chance of an update to 1.1.2 will render your device inoperable until a restore. Auto-Check off.
- Go to General-> Mail-> Auto-Check. Set it to Manual.
If you forget to do this step and update, proceed with the jailbreak in step 5 (even though SpringBoard is unusable) and we will fix it for you.
-------------------------------------------------- --------------------------------------------------
Step 4: Update to 1.1.2
1. Connect your device to your computer
2. Launch iTunes
3. Choose your device
4. Click Update
- If update shows 1.1.1 as you are the newest version, you may download the 1.1.2 from an Apple download server and shift-click (PC) or option-click (Mac) on "Check for update" and select the update you Downloaded.
- If update shows 1.1.2 as being the newest version, you may update from iTunes
Attention !!!
If update show 1.1.3 as it is the newest version, do not update from iTunes directly, then choose the file with 1.1.2 firmware (then before the server), then shift-click (PC) or option-click (Mac) To select it.
- DO NOT CLICK OR SHIFT-CLICK RESTORE: That will wipe the changes OktoPrep made.
5. Wait forever for your device to update
-------------------------------------------------- -------------------------
Step 5: Install iWorld from Installer, run it and choose your location.
Step 6: Use iSim
It will not be superfluous for your friends to learn this information, share their article with them!
Comments
When commenting on, remember that the content and tone of your message can hurt the feelings of real people, show respect and tolerance to your interlocutors even if you do not share their opinion, your behavior in the conditions of freedom of expression and anonymity provided by the Internet, changes Not only virtual, but also the real world. All comments are hidden from the index, spam is controlled.