 |
СО-ЭЭ6706
Round enclosure
Measurement and recording of electrical energy in single-phase alternating current networks
- Accuracy class: 2.0
- Rated-maximum current, A: 5-20;
10-40
- Rated frequency 50 Hz
- Full and active power consumed by a voltage circuit of 5.5VA and 1.3W respectively
- The total power consumed by the current circuit is not more than 0.35 V.
- Operating temperature range, 0С: -20 to +60
- Verification interval: 16 years
- Average service life: not less than 32 years
|
 |
СО-ЭЭ6705
Rectangular enclosure
Measurement and recording of electrical energy in single-phase alternating current networks
- Accuracy class: 2.0
- Rated-maximum current, A: 5-20;
10-40
- Rated frequency 50 Hz
- Full and active power consumed by a voltage circuit of 5.5VA and 1.3W respectively
- The total power consumed by the current circuit is not more than 0.35 V.
- Operating temperature range, 0С: -20 to +60
- Verification interval: 16 years
- Average service life: not less than 32 years
|
 |
CE2726
Measurement and accounting of electrical energy and capacity at 4 tariffs
- Accuracy class: 1.0
- Rated-maximum current, A: 5-50
- Rated frequency 50 Hz
- Full and active power consumed by a voltage circuit of 5.0VA and 2.0W respectively
- The total power consumed by the current circuit is not more than 0.5 V.
- Operating temperature range, 0С: -25 to +55
- Verification interval: 16 years
- Average service life: not less than 30 years
- Telemetry output
- There is a modification with an integrated power-line modem
The meter provides commercial accounting in systems (AMRMS)
|
 |
CE-2705
-
Rated voltage of controlled network 220 V
- -
Range of voltage variation of the monitored network (187 ... 242) V
- -
Rated load current 5 A
- -
Maximum load current 50 A
- -
Minimum load current 0,25 A
- -
Short-time overcurrent 150 A
- -
Rated frequency of controlled network 50 Hz
- -
Range of frequency variation of the monitored network (47.5 ... 52.5) Hz
- -
Total power consumed by the current circuit is not more than 0.05 VA
- -
Active and total power consumed in the voltage circuit is not more than 2.5 VA
- -
Accuracy class in the range of loads 1 ... 1000% nom.
Current 1,0; 2.0
- -
The transmission ratio of the main transmitter is 16000 imp / kWh
- -
Intertesting interval 16 years
- -
Average service life 30 years
|
 |
SOLO
Measurement and recording of electricity in domestic, small-engine and industrial sectors
- Accuracy class: 1.0;
2.0
- Rated-maximum current, A: 5-60;
10-80;
10-100
- Rated frequency 50 Hz
- The total and active power consumed by a voltage circuit of 8.0 VA and 2.0 W respectively
- The total power consumed by the current circuit is not more than 0.5 V.
- Operating temperature range, 0С: -25 to +55
- Verification interval: 16 years
- Average service life: not less than 30 years
- Telemetry output
The counter provides commercial accounting in the systems
|
 |
Mercury-200
Measurement and recording of electricity in domestic, small-engine and industrial sectors
- Accuracy class: 2.0
- Rated-maximum current, A: 5-50
- Rated frequency 50 Hz
- Full and active power consumed by a voltage circuit of 10 VA and 2.0 W respectively
- The total power consumed by the current circuit is not more than 2.5 V.
- Operating temperature range, 0С: -20 to +55
- Calibration interval: 8 or 16 years (see modification)
- Average service life: not less than 30 years
- Number of tariff zones: 1-4
- Multi-tariff meters have a serial built-in CAN interface that provides information exchange with a computer
- The possibility of fastening both in the traditional way, and on the DIN-rail.
|
 |
CA4-I672M, CA4U-I672M
Three-phase induction
Active energy of direct and transformer inclusion
Measuring and recording of active energy in three-phase three- and four-wire AC networks
- Accuracy class: 2.0
- Rated frequency 50 Hz
- Total power consumed by the voltage circuit from 5.0 to 6.0VA, active from 1.5 to 2.0W (depending on the type of meter)
- The total power consumed by the current circuit is from 0.6 to 1.0VA, and with a maximum current of more than 30A, not more than 2.5VA
- Operating temperature range, 0С: 0 to +40
- Calibration interval: 6 years
- Average service life: not less than 32 years
- Full nomenclature series for rated-maximum current, voltage and wiring diagrams
|
|
CA4-I678, CA4U-I678
Three-phase induction
Active energy of direct and transformer inclusion
Measuring and recording of active energy in three-phase three- and four-wire AC networks
- Accuracy class: 2.0
- Rated frequency 50 Hz
- Total power consumed by the voltage circuit from 5.0 to 6.0VA, active from 1.5 to 2.0W (depending on the type of meter)
- The total power consumed by the current circuit is from 0.6 to 1.0VA, and with a maximum current of more than 30A, not more than 2.5VA
- Operating temperature range, 0С: 0 to +40
- Calibration interval: 6 years
- Average service life: not less than 32 years
- Full nomenclature series for rated-maximum current, voltage and wiring diagrams
|
|
СА3-И670М, СА3У-И670М
Three-phase induction
Active energy of direct and transformer inclusion
Measuring and recording of active energy in three-phase three- and four-wire AC networks
- Accuracy class: 2.0
- Rated frequency 50 Hz
- Total power consumed by the voltage circuit from 5.0 to 6.0VA, active from 1.5 to 2.0W (depending on the type of meter)
- The total power consumed by the current circuit is from 0.6 to 1.0VA, and with a maximum current of more than 30A, not more than 2.5VA
- Operating temperature range, 0С: 0 to +40
- Calibration interval: 6 years
- Average service life: not less than 32 years
- Full nomenclature series for rated-maximum current, voltage and wiring diagrams
|
 |
CP4-I673M, CP4U-I673M
Reactive energy of direct and transformer inclusion
Measurement and accounting of reactive energy in three-phase three- and four-wire AC networks
- Accuracy class: 2.0 (for direct inclusion counters 3.0)
- Rated frequency 50 Hz
- Total power consumed by the voltage circuit from 5.0 to 6.0VA, active from 1.5 to 2.0W (depending on the type of meter)
- The total power consumed by the current circuit is from 0.6 to 1.0VA, and with a maximum current of more than 30A, not more than 2.5VA
- Operating temperature range, 0С: 0 to +40
- Calibration interval: 6 years
- Average service life: not less than 32 years
- Full nomenclature series for rated-maximum current, voltage and wiring diagrams
|
 |
CE2727
Three-phase electronic active energy direct and transformer inclusion.
Measuring and recording of active energy in three-phase three- and four-wire AC networks at 8 tariffs in 8 time zones
- Accuracy class: 1.0
- Rated voltage, V: 3 x 57.7;
3 x 100;
3 x 380;
3 x 220/380
- Rated-maximum current, A: 1-2;
5-10;
5-50;
10-100
- Rated frequency 50 Hz
- Full and active power consumed by a voltage circuit of 5.0VA and 2.0W respectively
- The total power consumed by the current circuit is not more than 0.2 V.
- Operating temperature range, 0С: -25 to +55
- Intertesting interval 8 years
- Average service life of at least 30 years
- Interface: RS232;
RS485;
Telemetering channel
- Intertesting interval 8 years
The modification with built-in electric power modem allows to use the meter in the system (ASKUE) with transmission of data on the power network 0.4 kV
|
 |
F669
Three-phase multifunction active-reactive
Measurement of active and reactive energy and power in two directions at 4 tariffs in 5 time zones
- Accuracy class: 0.5S;
1.0
- Rated voltage depending on wiring diagram
- Rated-maximum current, A: 1-1,25;
5-6.25
- Rated frequency 50 Hz
- Full and active power consumed by a voltage circuit of 4.0 VA and 2.0 W respectively
- The total power consumed by the current circuit is not more than 0.3 V.
- Operating temperature range, 0С: -20 to +55
- Intertesting interval 8 years
- Average service life of at least 20 years
- Interfaces: "current loop" type, telemetry output, optical port, RS232;
RS485
The counter for its functionality is not inferior to the best foreign samples
|
 |
Mercury 230
Three-phase electronic multifunctional active and active-reactive energy
Measurement and recording of active and active-reactive energy in the forward direction in three-phase alternating current networks with a nominal frequency of 50 Hz.
- The accuracy class of active energy: 0.5;
1.0
Active-reactive energy: 0.5 (1.0);
1.0 (2.0)
- Nominal-maximum current, A;
5-50;
10-100;
5-7.5
- Full and active power consumed by a voltage circuit of 7.5VA and 0.5W respectively
- The total power consumed by the current circuit is 0.1 V.A
- Number of tariff zones: 1- 4
- Range of operating temperatures C: -20 to +55
- Calibration interval - 8 years
- Average service life of at least 30 years
- Counters have a serial interface CAN, providing information exchange with the computer
- Counters can be used, both autonomously and in AMR systems
|
 |
СО-505
Purpose : The single-phase electricity meter SO-505 is designed for the recording of active electricity in everyday life, public and industrial premises.
Principle of operation: The operating principle of the CO-505 electric meter is based on the use of an induction measuring system.
Variants of execution : The electric meter СО-505 has a variant of execution СО-505Т with telemetric output.
The reading telemetry device allows the use of the meter in an automated system for monitoring and recording electricity.
Options for the execution of the casing, the presence of a retarder stop are determined by the customer.
|
 |
Purpose : Electricity meters SOE-5 are designed to measure active electrical energy in two-wire AC circuits with a voltage of 220V, frequency of 50Hz.
They are produced in three versions: one-tariff, two-tariff with an external tariff switch and a lot of tariffs with an internal tariffifier for work in automated systems for monitoring and accounting for energy consumption.
Counters with an internal tariff meter have a digital interface RS-232 or RS-485.
Using the digital interface, the time of the tariffs is set, the accuracy of the clock is corrected, and the data is read.
For storing information in the meters there is a non-volatile EEPROM memory.
The memory registers store data for each tariff.
The meters have a telemetric output galvanically isolated from other circuits.
|
 |
Electricity meters SOE-52 are designed to account for electricity consumption in two-wire electric circuits in closed rooms.
Can be operated autonomously and as part of an automated system for monitoring and accounting of electricity (AMR) using pulse output.
The meters correspond to GOST 30207-94 (IEC 1036-90) and are registered in the State Register of Measuring Instruments No. 17301-02.
Certificate No. РОСС RU.ME65.B00556
Pluses:
-The presence of LED indicator meter.
-Using SMD-mounting
-There is a telemetry output
|
 |
CA4U-510, CA4-514, CA4-518
THREE PHASE INDUCTION ELECTRICITY COUNTERS
Purpose : Designed for recording active electricity in three-phase four-wire AC networks in industrial plants and household consumers.
Variants of execution : СА4У-510Т, СА4-514Т, СА4-518Т have the built-in photoelectronic adapter with telemetric output for work in the automated systems of the control and the account of power consumption.
At the request of the customer, the counters are equipped with a stop-back stopper that does not allow theft of electricity.
Electricity meters are made of non-combustible materials.
SPECIFICATIONS
|
|
СА4У-510
|
|
CA4-514
|
|
CA4-518
|
|
Accuracy class
|
|
2.0
|
|
2.0
|
|
2.0
|
|
Method of inclusion
|
|
Transformer
|
|
straight
|
|
straight
|
|
Rated voltage, V
|
|
3х220 / 380
|
|
3х220 / 380
|
|
3х220 / 380
|
|
Network frequency, Hz
|
|
50
|
|
50
|
|
50
|
|
Rated current, A
|
|
3х5
|
|
3х10
|
|
3х20 (3х10)
|
|
Maximum current, A
|
|
3x6.25
|
|
3х40
|
|
3х80
|
|
Maximum current,% I nom
|
|
125
|
|
400
|
|
400 (800)
|
|
Sensitivity threshold, A
|
|
0.025
|
|
0.05
|
|
0.1 (0.05)
|
|
Gear ratio, rev / kWh
|
|
600
|
|
125
|
|
60
|
|
Number of telemetric output pulses, for execution of "T" imp / kWh
|
|
600
|
|
125
|
|
60
|
|
 |
THREE-PHASE MICROPROCESSOR ELECTRICITY COUNTERS
Purpose : Electric meters of the STE560 series are designed to account for active and reactive electrical energy in three- and four-wire three-phase AC networks in industrial plants and household consumers, as well as for work in automated systems for monitoring and accounting for energy consumption.
The counters are built on a digital signal processor DSP and are regulated by special programs.
For storing information in the meters there is a non-volatile EEPROM memory.
Data registers store data for each tariff.
The meters have a telemetric output, galvanically isolated from other circuits.
To display information, a liquid crystal indicator is used, which is stable at low temperatures.
The counters have a digital interface for the IRPS (current loop).
With the digital interface, you can adjust, set the time of the tariff action, adjust the hours and, if necessary, read the meter reading using a computer.
|
SPECIFICATIONS
|
Accuracy class:
|
- for active energy
|
|
1.0
|
- by reactive energy
|
|
2.0
|
|
Rated voltage, V
|
|
3х220 / 380;
3х57,7 / 100;
3х100
|
|
Rated current, A
|
|
5;
10
|
|
Maximum current, A
|
|
7.5;
40;
80
|
|
Sensitivity:
|
- for active energy,% Iн
|
|
0.25
|
- for reactive energy,% Iн
|
|
0.4
|
|
Counter constant, imp / kWh
|
|
1000, 5000
|
|
Operating temperature, оС
|
|
-20 to +55
|
|
Average service life, years
|
|
thirty
|
|
Mean time between failures, h
|
|
100,000
|
|
Inter-verification interval, years
|
|
10
|
|
Overall dimensions, mm
|
|
317 (283) х174х75
|
|
Weight, no more than kg
|
|
1.65
|
|
 |
SERIES OF METERS OF THREE-PHASE MICROPROCESSOR COMBINED
Purpose : Counters of the series STS5605, STS5602 are three-phase, multi-tariff, electronic, digital, combined devices that combine a multifunctional microprocessor counter and a meter of electrical energy quality indicators.
The counters of the STS5605 series of transformer switching are designed for measuring active and reactive power at industrial enterprises and energy facilities.
They are used in AMR systems to transmit measured values to the control center for control, accounting and distribution of electrical energy.
|
|
|
STK-3
Designed for measuring active and reactive energy in single- and three-phase circuits of three- and four-wire AC circuits, with the possibility of accounting in two directions, with direct or transformer inclusion, autonomously or as part of automated systems for monitoring and recording electricity (ASKUE).
Accounting for electrical energy at energy facilities, industrial plants, in the municipal and domestic sector in conditions of applying differentiated in time tariffs for electricity.
Meters can be used in technical or commercial metering systems.
Frequency of the measuring network, Hz
|
|
Sensitivity threshold, mA
|
|
Total power consumption of the parallel circuit, V · A
|
|
Total power consumption of the series circuit, V · A
|
|
Pulse telemetry output, imp / kVar / hr
|
|
Number of telemetric outputs
|
|
Weight, not more than, kg
|
|
The load graph for each quadrant, the number of accounting points
|
|
Digital interface
|
|
Self-diagnosis system
|
|
Overall dimensions, "Energy 8", "STK3-" mm
|
|
Overall dimensions, СТК1-10
|
|
Integration period
|
|
Number of Seasons
|
|
Number of time zones for each season
|
|
Rated voltage U, V
|
|
Rated current (maximum), A
|
1 (1.5), 5 (7.5),
10 (40), 40 (100)
|
Number of Switched Outputs
|
|
RS 485 data transfer rate
|
|
Intervalue interval
|
|
Relative air humidity at 30 ° С
|
|
Atmosphere pressure
|
|
|
 |
| A100
The meter A100 is designed for the calculation of active energy in single-phase AC circuits in single- and multi-tariff mode, as well as for use in automated systems for monitoring and accounting of electricity (AMRMS).
The A100 counter distinguishes performance, resistance to temperature changes, high level of information protection, insensitivity to a constant component and small dimensions.
- The A100 counter allows:
- Carry out both one-and two-tariff electricity accounting.
Switching of tariffs is carried out from an external tariff-maker.
- Register and store in memory the data confirming the reliability of the information, such as:
- Total active energy in the opposite direction.
- Direct indication of the energy flow in the reverse direction on the LCD.
- Number of power outages.
- Total operating time of the meter.
- Operating time after last power-up.
- Time of the counter in the absence of current.
- Number of restarted microprocessor.
- Number of cases of reversal of active energy.
- Transfer data via infrared (IrDA) or pulse output (RJ11).
- Store the data when the power is turned off in non-volatile EEPROM memory.
|
|
|
A1000
The А1000 meters are designed to account for active, reactive energy and power measurement in one or two directions in three-phase alternating current circuits, both in single and multi-tariff mode.
The counter A1000 allows:
- Carry out both single and multi-tariff electricity accounting (up to 4 tariffs).
Switching of tariffs is carried out from an external tariff-maker.
- Perform 2 measurements in multi-tariff mode:
- + P - active consumed energy;
- + P, -P - active consumed and released energy;
- + P, + Q - active and reactive energy consumed;
- + Q, -Q - reactive consumed and released energy;
- P = | P1 | + | P2 | + | P3 |
- active energy modulo;
- P = | P1 | + | P2 | + | P3 |, + Q - active modulo and reactive consumed energy;
- Record the maximum power.
- Register energy when the specified threshold of load power is exceeded.
- Record the absence of voltage in one or two phases.
- Measure and display the voltage, current, active, reactive and full power of the network in phase.
|
 |
ALPHA Plus (A2)
Multifunctional microprocessor three-phase electricity meters ALPHA Plus (A2) is designed for the calculation of active and reactive energy and power in 3-phase AC circuits, control of power quality parameters, as well as for operation in the ASKUE.
- Measurement of active and reactive energies and powers in two directions.
- Accounting for consumed and issued energy in the multi-tariff regime.
- Measurement of the maximum load power at the calculated time interval, fixing the date and time of the maximum active and reactive power for each tariff zone.
- Record and store in the memory of the load schedule data counter.
- Automatic load monitoring with the possibility of its shutdown or signaling.
- Transmission of measurement results via digital and impulse communication interfaces (up to two groups of galvanically isolated relays).
The ALPHA Plus counter measures, calculates and displays up to 46 values relating to the parameters of electricity.
These include:
- Current and voltage phases.
- Active, reactive and full power of the network.
- Active, reactive and full power phases.
- The power factor of the network and each phase.
- Phase angles of voltage and current vectors.
- The value of the second harmonic in terms of voltage phases.
- The value of the second harmonic in terms of current phases.
- The distortion factor of the sinusoidal voltage and current.
- Network frequency.
|
 |
Delta
The Delta meter is designed to account for active or active-reactive energy in three- and single-phase alternating current circuits, both in single- and multi-tariff mode, as well as for use in automated systems for monitoring and accounting for electricity (ASKUE).
- Measurement of active or active-reactive energy.
- Both single and multi-tariff electricity accounting.
- Installation on DIN-rail or panel.
- Pulse outputs for operation in the ASKUE.
|
|
ST-ER01 (SET)
- Accuracy class: 1.5
- Rated-maximum current, A: 5;
7.5
- Rated frequency 50 Hz
- Voltage 3х57.7 / 100
- Total power consumed by the voltage circuit 1VA
- Operating temperature range, 0С: -25 to +55
- Calibration interval: 6 years
ST-ER02 (SET)
- Accuracy class: 1.5
- Rated-maximum current, A: 5;
50
- Rated frequency 50 Hz
- Voltage 3х380 / 220
- The total power consumed by the 4.5V circuit
- Operating temperature range, 0С: -25 to +55
- Calibration interval: 6 years
ST-EA03 (SET)
- Accuracy class: 1
- Rated-maximum current, A: 5;
7.5
- Rated frequency 50 Hz
- Voltage 3х100
- Total power consumed by the voltage circuit 1VA
- Operating temperature range, 0С: -10 to +55
- Calibration interval: 6 years
ST-EA05 (SET)
- Accuracy class: 1
- Rated-maximum current, A: 5;
7.5
- Rated frequency 50 Hz
- Voltage 3х100
- The total power consumed by the voltage circuit is 1VA
- Operating temperature range, 0С: -10 to +55
- Calibration interval: 6 years
|
|
CO-EA05
- Accuracy class: 1.0
- Rated-maximum current, A: 10;
50
- Rated frequency 50 Hz
- Full and active power consumed by a voltage circuit of 5.5VA and 1.3W respectively
- Operating temperature range, 0С: -35 to +55
- Calibration interval: 6 years
|
Comments
When commenting on, remember that the content and tone of your message can hurt the feelings of real people, show respect and tolerance to your interlocutors even if you do not share their opinion, your behavior in the conditions of freedom of expression and anonymity provided by the Internet, changes Not only virtual, but also the real world. All comments are hidden from the index, spam is controlled.