Start of section
Production, amateur
Radio amateurs
Aircraft model, rocket-model
Useful, entertaining 		Stealth Master
Electronics
Physics
Technologies
Inventions 		Secrets of the cosmos
Secrets of the Earth
Secrets of the Ocean
Tricks
Map of section
Start
Forum
Use of the site materials is allowed subject to the link (for websites - hyperlinks)

"THINKING OUT LOUD"

SCIENTIFIC ROMAN ON THE BASIS OF SCIENTIFIC THEORY
UNIVERSAL, NEUTRONIC PHYSICS AND NEUTRON CHEMISTRY

Physics. Discoveries in physics.

Valeriy Fedorovich Andrus

" Our task is to develop means of obtaining energy from stocks that are eternal and inexhaustible, to develop methods that do not use the consumption and consumption of any" material "carriers. Now we are absolutely sure that the realization of this idea is not far off.: The opportunities for development This concept consists precisely in the fact that to use for the work of engines in any point of the planet the pure energy of the surrounding space ... "

(Tesla, 1897)

Leave a comment

To get started, download the conversion table for chemical elements
and
Familiarize yourself with the basic concepts of neutron physics

See also:

REFRACTION OF LIGHT FROM THE POSITION OF NEUTRON PHYSICS

Consider a plane-parallel plate of glass, onto which the beam of light falls at an angle. The input and deflection of the ray have just been considered. At the exit of the beam from the glass everything will repeat, only in the reverse order. Work on the reverse rotation will be performed by the same gravitational forces of the "new" emerging common magnetic field. The general magnetic field will begin its birth on the long part of the beam emerging from the glass, respectively, pressing the ropes towards the short side of the beam behind the glass until a common magnetic field is formed over the entire beam. As a result, the beam remains parallel to its original direction only with displacement (Fig. 1). Here it is convenient to immediately consider the decomposition of the white Light passing through the prism and falling at an angle to its face.

Why the ray of light performs the turns, passing through the prism we understand.

Let's make, as always, a picture:

    1. In front of us on our sheet of paper, closer to the left side, is an equilateral triangular prism, which is located at the top with the base pointing upwards.
    2. The white ray of Light falls at an angle from above on the left side of the sheet to the left side of the prism.
    3. The white screen is located on the right side of the sheet, perpendicular to our sheet.
Light refraction.

Fig.1 Refraction of Light.

The white ray of Light, falling at an angle from above on the left side of the prism at the media interface, performs a rotation upward and slightly diverges at an angle.

Let us dwell on this point and recall that the weaker the compression of the magnetic field, the greater the speed of light and the less twisting of the ropes. Inside the prism we see the cone of Light with an oblique cut. The longest path with the least compression at the end will be at the top rope, and it will have the fastest speed of all the ropes emerging from the prism. The shortest path with the greatest compression will be at the rope at the bottom and, accordingly, it will have the slowest speed. The red color on the screen will be below, and it has the least speed of ropes, the purple will be at the top with the fastest ropes. Color determines the speed of light and the size of the magnetic field of its ropes.

Adding white Light from the decomposed colors produced in reverse order will lead us to a common magnetic field that will lead us to its original state. We will specify what we mean here. If we take a bundle of light beam ropes, then the greatest compression will be the ropes on the beam axis and its speed will be the smallest. The greatest speed will be near the ropes along the periphery of the beam. As you can see, all the colors are initially in the white light, and the red color is in the center. Here it is necessary to say how we see the object and color. The object and color we see or perceive under the mechanical influence of the ropes of Light.

When we say that we see, it means that an avalanche of mechanical strikes of neutrons of Light collapsed. The stronger the impact at a given point in the material of the eye, the higher the velocity of neutrons that bring information about color. The higher the neutron density, the brighter the light and the stronger the illumination.

When we watch a color TV, we do not suspect that this is the reverse eye of a person. Put the TV in place of the eye. If the television signal is converted into an image by the neutron bombardment of the screen, the mechanical effect in the eye - the image turns into an electrical signal that enters the brain. The electrical signal is formed on the principles of the piezoelectric effect. Therefore, the TV is the reverse eye. In order to obtain the desired color of the material or paint, it is necessary to create such a structure that the gravitational compression of the ropes and the twisting of the neutrons, ensuring the acceleration of the Light, correspond to this color.

For example, we need to get a purple color - this means that we need to increase the speed of the white Light. There are two ways to achieve this:

1. Due to the increase or decrease in the temperature of the material, the neutron spin in needles is changed.

Many saw how the parts are machined on a lathe, and when the cutter is fed heavily, the chips become violet. Here, part of the metal gratings under mechanical influence was destroyed and converted into heat carriers, as a result of which the temperature and spins of neutrons increased. How does neutron spin affect the speed of white light?

The ropes of the light beam, encountered with the crystal surface of the metal lattice, are destroyed and, in contact with the neutrons of the grid needles, change their twist to a larger one.

2. All bodies are either crystalline or semi-liquid, in which the lattice consists of cells and fluid elements.

In a purely crystalline body, it is possible to obtain a cell by the necessary neutron spin by a chemical method, connecting the hedgehogs of not one element but different ones with different neutron twists. In the same way, you can get the necessary twist in semi-fluid bodies.

Consider the process of reflection of the light beam from a solid surface.

Let us imagine the crystal lattice of a plane body, on which a ray of light falls at an angle. The crystal lattice has either a chaotic or very dense structure and the ray can not pass through it. Ropes, encountered with a barrier, are destroyed into individual neutrons and first fill the upper grid cells, creating an ideal plane from which subsequent neutrons rebound like balls with altered neutron spin.

Therefore, the angle of incidence is equal to the angle of reflection. Reflected neutrons create a stream, and again restore their rope structure with a new speed and a new color.

If we take two intersecting rays, then at the intersection point, the ropes are destroyed by neutrons and then the structures are restored. The persistence of the rays is the presence of streams. There is a flow, there will be a structure!

Let's sum up:

There are no waves in the Light phenomena. There is a different speed of light and the destruction of rays by neutrons with subsequent recovery.

Electromagnetic waves exist, because there is a medium that is a spherical grid of the Earth's magnetic force lines and gravitational fluxes from neutrinos.

Another mystery - the dualism of the wave - the particle ceased to exist.

print version
Author: Valerii Fedorovich Andrus
PS The material is protected.
Date of publication 15.12.2003gg