Start of section Production, amateur Radio amateurs Aircraft model, rocket-model Useful, entertaining	Stealth Master Electronics Physics Technologies Inventions	Secrets of the cosmos Secrets of the Earth Secrets of the Ocean Tricks Map of section
Use of the site materials is allowed subject to the link (for websites - hyperlinks)

UNIQUE SCREW, (LIPADE) OF A NEW GENERATION!
SUPERVINT!

Rachkov Yuri Gennadievich

The idea is patented, the development has no analogues, and similarity.

The proposed useful model is the improvement of the propeller, blades, turbines, opening up new horizons in the development of screws and blades, and giving rise to a new generation of these mechanisms.

The basic aerohydrodynamic principles are used in the model, and an "odd field" is opened for theoretical and practical research.

Here are the most curious results of using the idea of ​​the Rachkov screw :

1. Virtually any existing screw, or blade, can be changed to increase its efficiency.
   This can be done in three ways:
   A) Reduce the weight of the blade, or screw.
   B) Increasing the weight of the blade, or screw.
   B) Conditionally retaining the weight of the screw can achieve a double increase in its efficiency.
2. The body of almost any geometric shape: a cube, a ball, a cylinder - can be given the properties of a screw, or blades.
3. Theoretical (and practical, depending on the purposes) form of helicopter blades can be in the form of bars, cylinders, or approach them.

The author made a square section bar ( 10x10x280mm ), working in wind turbine mode, i.e. Lifted.

This can be successfully applied in conditions of using screws and blades in closed constructions: turbo pumps, turbines, etc.

This will bring quite unusual results when the turbine is made in the form of a truncated cone, and the leading and outgoing pipes will have different diameters. Those. Using the principle of the Rachkov screw in turbines of the closed loop (hydraulic amplifiers, etc.), it is possible to achieve significantly larger, by an order of magnitude, or decreasing the pressure of the liquid and air.

For propellers, an increase in efficiency will occur at subsonic speeds of the final sections of the screw, and the risk of vacuum cotton will decrease.

Especially it should be said about water screws and blades, in which it is possible to achieve a noticeable reduction in the risk of developing vacuum cotton.

To avoid unauthorized publicity of the idea, it is not transmitted over the Internet. Acquaintance with the idea and issue of drawings of the model are made at the meeting in person, and after the conclusion of the license agreement between the author and the official representative (manager) of the enterprise.

Complaints of the idea - utility model:

• Unique Screw, (blade) of the new generation! Supernorm!
• The revolution in hydro-aerodynamics!
• The introduction of new technologies in the construction of a new generation of screws (blades),
• Will open new horizons in the production or modernization of aircraft, ships, power plants (based on wind engines).

The advantages of a unique screw are as follows:

• Has a three-time attack, which increases the capture of air or water.
• Has a directional and controlled output of air or water.
• Movement on a concentric projection (the principle of a hurricane), which gives an increase in the release of air or water.
• Strengthening the traction force by 10-50% , and more.
• High coefficient of efficiency, more than 10% .
• Creates a turbojet traction.
• Reducing the risk of overlapping blades.
• Reduces the likelihood of vacuum cotton.
• Increase the stability of movement (for an aircraft or a ship).
• Increased maneuverability and controllability (for an aircraft or a ship).
• Technological complexity can be minimized by approbating an idea with the help of a so-called transformer.
• Shortening of takeoff run length (aircraft).

The unique screw is applicable:

• For air transport means: airplanes, helicopters, and "small" aircraft - deltacells, etc.
• For surface, submarine, and for hovercraft, in aircraft-ship modeling. Using the idea of ​​Rachkov's screw, it is possible to significantly reduce the risk of vacuum cotton in ship screws and underwater wings.
• For power plants, and windmills based on windmills.
• For household appliances: vacuum cleaners, air conditioners, pumps, hair dryers, etc.
• For flying (propeller) toys.
• It is possible for drilling, drilling, etc.

We invite investors, partners, interested parties to cooperate.
Commercial offer, license agreement, proposal for production.
Russia 644031, Omsk, ul. The 20th Line, 59-a, sq. 63.
Tel: (3812) 36-86-88.
Rachkov Yuri Gennadyevich.

print version
Author: Rachkov Yuri Gennadievich
PS Material is protected

NEW ARTICLES AND PUBLICATIONS
	The technology of manufacturing universal couplings for unbreakable, threadless, flossless connection of pipe sections in high pressure pipelines (video is available )
	Technology of oil and oil products cleaning
	On the possibility of moving a closed mechanical system at the expense of internal forces
	Fluorescence in thin dielectric channels
	The relationship between quantum and classical mechanics
	Millimeter waves in medicine. A New Look. MMV therapy
	Magnetic engine
	Heat source based on pump units