OPENING blocker Method 5: Getting rid of lower Lapo
|
This method works for all types of bollards. It requires trained tool - Allen key 6 mm. |
Blocker has the ability to adjust the "legs" of different widths for the wheels. Produced under the adjustment bolt vnutrinney Allen key 6mm. The main disadvantage is that the cap screws are turned to the wheel, that is, the "inside" the lock.
Specially trained to 6mm Allen "tear away" bolt. To do this, depending on the radius and profile rubber jacking machine may be required or even lowered a little wheel.
When the bolt ripped off, it turns very easily. For ease of unscrewing the bolt has torn, I made this tool:
It allows you to twist the screws at an angle of not removing the hexagon bolts. The photo is not a piece of hexagon is rounded (chamfered not removed), and it is necessary, as otherwise it will be difficult to get into the bolt from under the tire.
Unscrewing the two lower "foot" (or one lower and upper "poker"), quietly remove the lock from the wheel. In some situations, one missing and otkruchennoy foot. It depends on the tightening force on the wheel lock, its laxity and profile rubber.
For more information about the modified hexagon at 6mm, see the section Tool
Comments
Commenting, keep in mind that the content and the tone of your messages can hurt the feelings of real people, show respect and tolerance to his interlocutors, even if you do not share their opinion, your behavior in terms of freedom of speech and anonymity offered by the Internet, is changing not only virtual, but real world. All comments are hidden from the index, spam control.