In this article, I will provide the most simple tips to improve system performance. Here installed Windows, but here's one problem, the system constantly slows. If so then this article is for you. Of course some tips on optimizing Windows will be useful to owners navarochenyh computers. After all, you can speed up your computer up to the maximum possible.
Step 1.
Enable DMA mode. Go into Control Panel - System - Devices - Disks, select where your hard disk - Properties - Setup and set the check box next to the DMA. Just turn on the DMA mode for your CD-ROM. Control Panel - System - Device - Reader CD diskov- properties - setting. All these actions, we will speed up the hard disk and CD-ROM.
Step 2.
Configure virtual memory. Go to Control Panel - Performance Sistema, it presses on the Virtual Memory button, and choose the virtual memory settings manually (put the maximum and minimum values are the same, equal to about 250 mb). When installing a fixed virtual memory size leads to some free memory loss.
Step 3.
Disk Defragmentation. Once you have set a fixed size virtual memory. It is necessary to defragment the drive. Because when repeatedly recording and erasing a hard drive information files are mixed and it turns out that a program file is first disc, the second in the middle and the third at the end. What materially slow access to them and thus slows down the computer. It defragments desirable to carry out 1 time per month and even more often. With this task will easily cope Defrag.exe program with Windows. For its launch, go to Start - Programs - Accessories - System Tools - Disk Defragmenter. Better yet, use the defragmentation program from Norton Utilities package.
Step 4.
Resolution buffering removable drives. Go into Control Panel - System - Performance and click on the button File system, select the removable disk and put the checkbox next to Enable write-behind caching for all removable drives.
Step 5.
Network server. Go to Control Panel - - System - Performance - File System tab, select here Hard drives and install a network server as a typical part of the computer.
Step 6.
Remove unwanted programs from startup. Next, we remove unnecessary programs from startup. Click Start - Run and type "msconfig", and then start System Configuration Utility. Select the "Startup" and remove all the check boxes, except for those that you need. You can remove all the boxes. Restart the computer.
Step 7.
Sounds and screensavers. Turn off all Windows sounds. Control Panel - Sounds and Multimedia.
Step 8.
We remove the wallpaper from the desktop. When using the wallpaper on your desktop, used by about 2 Mb of RAM. To disable them go to Control Panel - Display and select the Background tab.
Step 9.
Unnecessary fonts. If you have installed on your computer a lot of fonts, the OS loads all of them, which significantly slows down the operating system. only the most necessary should leave. To remove unnecessary fonts. Go to the Control Panel- Fonts. Only careful not to remove the system fonts.
If all the above actions, the performance of your Windows operating system should increase significantly.
Comments
Commenting, keep in mind that the content and the tone of your messages can hurt the feelings of real people, show respect and tolerance to his interlocutors, even if you do not share their opinion, your behavior in terms of freedom of speech and anonymity offered by the Internet, is changing not only virtual, but real world. All comments are hidden from the index, spam control.