Not official 3G and 3GS yet to update on the new 3.1.3 firmware, there is no unlock for it.
This page has been robot translated, sorry for typos if any. Original content here.
Jailbreak from Dev Team 3.1.3 for 2G for Windows
Before proceeding, read the entire FAQ!
On official 3GS jail does not work!
For 2G and 3G ( official ), boldly update to 3.1.3 and do the Jail.
Update to firmware 3.1.3 , and then follow the words in the thread.
The program redsn0w-win_0.9.4 for jail plug firmware 3.1.2
Update iTunes to the latest version, for those who do not have it, you can download it
Update the firmware on your iPhone .
This can be done through iTunes , so that he downloaded and installed the firmware, or manually, as described below. ( Let iTunes do the installation itself )
ITunes stores downloaded firmware along this path.
For Windows XP C: \ Documents and Settings \ username \ Application Data \ Apple Computer \ iTunes \ iPhone Software Updates
For Windows Vista and Windows 7 Start \ username \ AppData \ Roaming \ Apple Computer \ iTunes \ iPhone Software Updates
For Mac OSX \ username \ Libraries \ iTunes \ iPhone Software Updates
How can I save all the data before the firmware, we read my links at the very bottom of this topic.
Who needs the firmware separately, you can download it HERE
Now proceed to the very process of Jailbreak
on the desktop, unpack the archive, and run redsn0w-win_0.9.4
Only for 2G
if you need unlock, then download and unpack bootloaders ( for iPhone 3G is not necessary
3.9 and 4.6
users, we do everything just like that, only redsn0w
The phone is connected to the computer, turn off the phone, but do not disconnect from the computer. 1.
Click the Browse
button and select the firmware 3.1.2
in the window that will open. 2.
Then click on the Next
If you check the Unlock
check box, the program will ask the bootloaders
I do not advise you to expose your iPhone to a
permanent unlock, the radio module (the board
) may die from the loads on it.
Those who on firmware 1.1.4
did unlock, or you bought already with firmware above 1.1.4
do not do it more unlock, on 2G
If suddenly after the Jail you do not have a network, you need to remake the Jail and check the Unlock
If this happened, then earlier your phone unlocked Zibri (which is not very good)
Next, check the Install Cydia
check box and click Next.
Click on Next
and immediately click on the phone button Power
We follow the activity of the lines; 1st
line 3 seconds
hold the Power
line, do not release the Power
button and clamp the Home
line, release the Power
button, and keep the Home
button until the phone turns white.
Next we'll see these windows on the computer and click on Finish
when the button becomes active.
On the phone display, we'll see a jailbreak, and then a running pineapple.
can tupanut and Windows
will close the application, do the following.
When the Nome display turns white, the disk appears on the display, the program can say that an error has occurred and will close its Windows.
It's okay to pin Home + Power
and as soon as the display goes off, release both buttons, the display should remain blank and black.
Repeat the Jail procedure again and it will work out!
Your phone is unlocked. Who needs an unlock and the rest who start working with Cydia
, my advice. 1.
Do not run Cydia
while on your phone there is no connection to the Internet, EDGE or WiFi. 2.
Check or configure the Internet connection, and then run Cydia
. 3. Cydia
reorganization will begin. Wait until Cydia
closes itself after the reorganization, and you will be thrown to the desktop. 4.
again and you will see important updates for Cydia
, install them.
All your actions with the phone you do at your own peril and risk!
Now everyone can publish articles
Try it first!
It will not be superfluous for your friends to know this information, share their article with them!
Liked? Subscribe to the RSS
You can also support shram.kiev.ua, click: