TECHNOLOGY OF THE ADHESION FOR ADHESIVE
LEATHER TO THE IRON AND THE TREE

Glossary of terms

But | B | In | | G | D | Ж-и | To | | L | M | N | About | N | Rs | T-y | Fc | Ш-я

In order to glue the skin to the iron, cover the iron with lead white. Later, as if the applied layer dries, grease with glue, prepared as follows: take the selected carpentry glue, lower it into cold water, until it does not soften, and then dissolve it, with slight heating, in vinegar. Then add 1/3 of the purified turpentine, thoroughly mix everything until a uniform mass is obtained which is still applied by the brush to the iron, the skin is immediately applied and pressed tightly to the required room.

In order to glue the skin to the log, prepare the subsequent glue:

Stir in 65 parts of water in 65 parts of wheat starch, adding 135 elements of vodka, 100 parts of chalk in powder are dissolved in this liquid mixture. Immediately prepare a second mash of 35 elements of water, 35 parts of carpentry glue and 35 elements of turpentine. Both prepared mixtures are poured together and heated in a water steamer until a homogeneous mass is obtained which is used in a cold state for attaching the skin to the wood also to other objects.