This page has been robot translated, sorry for typos if any. Original content here.



however | b | in | g | d | w-and | to | l | m | n | about | n | p | s | t y | f-c | sh-i

Amber products can be glued as follows. The joined surfaces are washed with an aqueous solution of caustic potassium, slightly heated and also firmly compressed. The glued elements can be smeared with a thin layer of boiled linseed oil after which the seam should be gently heated over the charcoal flame. At the same time, the parts to be joined must be strongly compressed with a clamp or tied with wire. It is recommended like glue, consisting of a solution of solid copal in the air.