Start of section Production, amateur Radio amateurs Aircraft model, rocket-model Useful, entertaining	Stealth Master Electronics Physics Technologies Inventions	Secrets of the cosmos Secrets of the Earth Secrets of the Ocean Tricks Map of section
Use of the site materials is allowed subject to the link (for websites - hyperlinks)

BASES NEUTRON PHYSICISTS

Valery Feodorovich Andrus

Russian

The table of conversion of chemical elements by VF Andrus.

CHAPTER II
Essentials of Neutron Astrophysics

STARS

A STAR - is a body producing Light with loss in its mass.
A STAR EMBRYO - is a body producing Light with increase in its mass with the help of lightning.
A STAR CHILD - is a body (pulsar) producing pulsating Light with increase in mass with the help of a shock wave.

In accordance with the NA conception of the worlds' parallelism, and the directness of development, from smaller to larger, originally there was not out of the world, which we observe nowadays. However, principles with sequence from change from density to flux, from energy to carriers, from liquids and solids, are always kept as the simplest ones.

Structural arrangements of particles, energy carriers, chemical elements, liquids, and bodies. With particles growing, conditions of existence of all worlds change in, as every new Light in electromagnetic radiation. For example, X -radiation was usual Light for one from the previous worlds in due time. There were and X- ray stars there. The X- ray star body density was higher than that of the star.

If we admit, that quantity of matter and energy in the Universe does not change in, with matter concentration in larger and larger stars, Growth of the carriers-particles leads to "eating up" (absorption) thinner worlds by rougher ones, as the total quantity of the matter is unchangeable. Distances between the stars in the growing worlds were constantly increasing in, and so was Light action radius. What did that get? The answer is univocal - stabilization of the conditions in larger and larger area of ​​the space supporting by one star!

Stabilization of the conditions. If we remember of gravitational time, the tempo of living in the thinner worlds is quicker, than in rougher ones.

As we see, it occurs in the concentration of all worlds in areas, where planets, stars, and their generation places are. Localization of the conditions on large distances leads to uniqueness of all matter forms of development, ie to various originations. For example, local condition of Australia led to the development of marsupial animals.

Let's look at a human being and answer our question: "Do you want to live in a multi-layer property?". Yes, they do, and phantoms photos prove this. Let's remember the Middle Ages and metallic knights' armours. Our visible body is armours for our thinner body, which has to survive in the new rougher world.

Stars, planets, people, and everything in the Universe are born on the basis of thinner worlds with layering rougher and rougher worlds with complete analogy with phantom.

It should be mentioned here that all processes in the nature are circular. Firstly a Star grows, and neutrons are grown, and then a backward breaking.

If you remember the definitions of energy and work, we can see in vertical combining, ie work, but as the start served energy-division. An impression may be formed, that it is the consequences of the Big Bang, and the theory with the same name can exist. In accordance with that theory, it is necessary first of all to integrate stars-neutrons for realizing the project on collecting all matter in one body. That work can not be done by two main reasons:

1. Stars are not calibrated, and so are the stars can not be collected in pentads;
2. Stars Light is the most powerful mechanical repulsive force in the Universe, which acts like repulsive forces at proximity.

Around the world, the tangible colliding (when repulsive forces are overcome). An explosion will occur at the central collision of stars ( Fig. 27 ).

Let's consider the very first star of the thinnest Universe world. We have uniformly distributed particles in the infinite space - allow them to move and to interact.

Particles interactions and motions will lead without fail to that uniformly distributed density (conditional assumption) will be broken in the local area of ​​the infinite space.

Particles fluxes will occur from the higher density area to the lower one. If a flow exists - chemical elements will begin forming - this is working on integrating particles with the reduction of their action area and increase of rarefaction between the two zones. Chemical elements, as the larger structures, will move to the center of the rarefied zone by inertia, forming there a gas-and-liquid cloud with crystalline inclusions. The increase of rarefaction between the cloud and the rest space, will lead to an increase in the flow of energy. They will be short impulse currents, which have collided with the cloud, will transform into thermal carriers and will start heating it up. The flows and heating up will lead to chemical elements. The spherical rarefied zone, its surface will increase in quantity, and quantity of high-frequency currents. When the cloud and the rarefied zone is reached, sufficient quantities to produce high breakdown voltage, lightning will occur, and the chemical elements will start overgrowing with pentads to globoids with calibration by centrifugal force at the given temperature. Let's look at the make-up on the Earth photo ( Fig. 28 ) to make sure of the possibility of such a vertical lightning flow existence.

Let's imagine, what is the main point here: "What can we see, if we look at the clouds with lightning from the top - from airoplane or spacecraft?" Let's imagine that Earth's surface is covered with clouds, lightning, and from the top, We shall see a luminous sphere. Huge spots - lightning roots in the clouds, will radiate Light in the outer space. Having watched in a telescope, and photographed such an object, the astronomers will consider it a star. In the centers of many galaxies today, we can see large light structures (scattered Light structures) ( Fig.29 ). What is it? It is the former black hole, and now - "mother" bearing stars garlands with detachment of gas sleeves, in which they are located. Such a powerful light structure in the center of the galaxy is not scattered by the stars.

Such insertions will be made regularly, to make sure of correctness of reasoning.

Let's go on.

The cloud will be saturated with those of the x- neutrons until the pentads occur in them, which moves from the high density zone to the center.

Having met in the center, x- neutrons can not form chemical elements, because flows have disappeared, and a globoid is formed there from them. That body begins to grow, twisting the cloud and "eating it up", because x -neutrons are formed on the basis of its chemical elements.

When the cloud has been processed, and lightning have collided with x-neutrons, they will be the first light of the star embryo.

Being the most powerful mechanical force, Light will sharply increase the spherical rarified zone because of the compressing particles of the surrounding space with forming chemical elements.

As Light increased the rarified zone, the lightning disappeared because of insufficient voltage.

Light impulse was one-time and the outer cloud rushed to the rarified zone to the rotating x -neutron body.

At the moment of collision, a shock wave (a surface of a thin thickness, in which a chain reaction occurs) is generated, in which the chemical elements of the outer cloud begin to be processed.

After reflecting, the spherical shock wave pulled out the outer cloud after it.

After compressing, the outer cloud (the dark matter) will rush again to the vacuum zone to the globoid, and the process will repeat a lot of times - it is a pulsar - a star - a child.

Let's cite a paragraph ("Signals from ... the Black Hole!" A magazine " NLO "), which is a confirmation of the theory. Light on the basis of x-neutrons is not seen by us, as well as X -radiation. "... having based on the research spacecraft" RHTE "data, NASA astronomers, informed about the observed by them unique phenomenon. X- ray beams in the various time of the day are the thrown off of the gaseous circle of the black hole (not luminous yet. Author)! It is the best of all. Such a phenomenon occurs at a periodical displacement of the gaseous circle orbit. The scientists made a conclusion - that, the black hole, distort space-time, and the matter together with that. At present astronomers consider the existence of an analogous phenomenon around neutron stars.

Let's remember, that's about the repetition of principles and processes in the parallel worlds. The paragraph runs about X -ray carriers-particles, which are larger than the neutrino (anelectric carrier of the 1-st world), and we are talking about x -neutron of the x -parallel world. The matter of the case that does not change in the multi-layer world and x -neutron began in the given given case. Let's remember, that the Light moves not after the shock wave, but to the opposite side. Expanding, the shock wave moves from the x - neutron body, and there is not Light in the surrounding space (no X- ray impulse. When it fades out, and the compressed cloud rushes back to the body to the rarified zone, the light from it will rush to the outer space (it is a periodical X- ray impulse with periodical disturbances of the cloud by the shock wave in the paragraph ).

The scientists' conclusions have been cited with one aim only, in order, that you could contain and analyze them. A moment always occurs in the periodical action of the pulsar, when the last shock wave is unable to be generated. The cloud is maximal heated up and pressed to the x - neutron body. It is steam in the main mass, as well as our usual clouds on the Earth. A reason, by which the last shock wave was not generated, is not enough its velocity. What occurs at the moment of contact with the x -neutron body, rotating around two axes? A thick spherical film from pentads and cubes of the x- neutrons scales off under action of centrifugal forces and of the cloud collision. To make things clearer, let's pass to our common life. Everyone has a lavatory, and there is some lavatory paper in the shape of a roll there. Take a roll in the left hand, and the paper. At the same time, start to your left hand. As a result, we have a double rotation of the paper. Let's note, that the tape goes out from the roll tangentially. Let's imagine, that a lot of conical helical pipes go out tangentially - it is an orbital plane of the roll. Now, let's substitute the cylindrical roll to the spherical one and try to do the same actions. Some changes will occur in us. The spherical film will start in the strips, as if it would come from a great many parts cylindrical roll. As a result, we can not get a single conical helical pipe, but many of them are they are star threads, they are twisting among themselves in small groups, like threads in clothes ropes - they are star trunks of tornado.

If you look at the conical helical pipe from the lavatory paper, we shall see that it would get a rather rigid construction. You can move some not heavy objects with the help of such a pointer.

A thick spherical film, of which pipes - star threads are twisted, taking certain rigidity, capable of applying steam clouds out.

We have obtained helical pipe-threads of the x-neutron star, but where is Light?

Let's start with the threads. There is a rotating fluid flow there, and we have known, if a circular flow exists, we will obtain an analogue of the magnetic lines of force of all kinds of particles in that side. It is the first thing.

Secondly , at the presence of the circular lines of force, a gravitational flow perpendicular to them. Collision of the various particles will lead to their splintering in the main, and part of them will start growing. Let's remain the explosion name - "thermonuclear" for the x-neutron star and all worlds. If an explosion exists - a spherical shock wave exists (a thin thickness
Surface, in which a chain reaction runs) in the root of the thread in the first
Present sufficient circumstances.

The shock wave surface shakes the threads in the hollow part, shakes loose the surface shell of the star body and moves along the thread-pipe to its outlet. Vacuum zone is formed after the shock wave, in which all particles (let's call them material) rush, forming a flow with moving sharp boundary before it, and they are conditions for forming needles, threads, and energy carriers ropes of Light in the given Case.

Also, we have known, that at the presence of the shock wave, Light moves to the opposite direction. Gases flow, moving after it, can not produce light. Hydrogen "cubes" and Helium "sticks", which could be taken for large particles, and the light is formed as after the shock wave in the opposite direction One direction with it. We have two opposite directions. Light fluxes and different velocities of the wave. Light ropes of the material material Light ropes of the shock wave and reverse direction of their formation flow. A single coinciding with the shock wave direction. Light will be produced in the thread, until it has the shock wave. The shock wave fades out after the outflow from the thread. Sides of the pipethread end come to the vacuum zone after the shock wave and contract. Remaining material flow tears a piece of the end of a thread, which has been blocked by its way. The threads are good visible on the Sunspots ( Fig. 30a , b ).

Conditions for the shock wave generation in the thread are very often insufficient, and then without chopping off. The star gravitational flow, moving to it in evolvent, makes loops from such threads ( Fig. 31 ).

It may happen that there are no shock waves in the whole rope from the star threads, and then a similarity to the American tornado, consisting of many loops in the final phase is generated ( Fig. 32 ).

Light impulsively comes out from the threads. So, that average impulse lasts for 160 minutes on the Sun. The light itself comes out of the fiberglass luminaire. The shock wave velocity is about 4 km / s . Altitude of the Sun atmosphere will be approximately 38400km . Neutron body of stars in all the world is cold, as the whole energy is in the conserved form in the neutrons. "Pentads and Hydrogen" cubes ".

Birth of the 1-st (our modern rough) world star always begins with the birth of the thinnest world star, which is conventionally called as the x -world. That scheme from the thinnest x -world to the roughest 1-st world is preserved forever, whatever would be formed in the Universe. Geometric dimensions increase in size from the thin to the rough. The phenomenon is seen by the eventual result only. In the thinnest world, the tempo of the gravitational time is the fastest, and the movements of the particles. While passing from that thin world to all subsequent ones, tempo of time are slowed, and so are the movements' velocities. From there, the next conclusion is: before the 1-st world star birth, which we observe, one and the same star has been born in every parallel world at the same place. In other words, that the scenario was repeated in the preceding worlds, that is, today's event is repetition and consequence of one and the same event in the preceding worlds. The preceding star appears as a vacuum to every subsequent star. So, the previous star to any usual star is an X- ray (or electromagnetic) star.

We started our consideration with the very first star in the Universe. By that reason, it could not be formed by a very precise conception of events in time sequence. A cycle of superposition and development of the worlds with the star system. There is not a constant cast of the Universe from its birth up to nowadays in the nature. A constant development and generation of a new multilayer world. The absolute emptiness of the time zone, the black hole, is the coming of the first particles, the chemical elements, the liquids, and the crystalline solids of the thinnest world. Then, the subsequent world considers the preceding star as the emptiness of the zone with the sphere inside, to be free adsorbed, and so repeatable process continues to our 1-st world. After generating the atmosphere of the star, and pressing clouds out by Light from the multi-layered worlds, the thinnest worlds would move first from their high density zone to the lower one, which would form centers of the future planets and satellites.

After generating planets and satellites, and this is an increase in the multi-layered worlds density, moving with the developing world. In those layers, the giant space flows are absent, and in result of heating planets and satellites up, a number of all worlds. The first "eaters", in the proper sense of the word, are particles of all worlds, which "eat up" the multi-layer gravitational flows of the star for forming its small magnets and maintaining its mechanical excitation. They are followed by chemical elements and energy carriers, which form small magnets and maintain excitation of their neutrons. Pentads in the needles in all worlds. We have known already, that gravitational flow is energy, ie "food". The primary "mouth" is the South pole of any small magnet. Evolution from inanimate nature to animate one is built on "feeding" the larger small magnets by using the convenient systems in various chemical elements of the multi-layers worlds. For example, our 1-st world chemical element combines
To itself, not only the first world chemical elements, but all the worlds' chemical elements, ie the formed certain system, which can "feed" the gravitational flow on. The elements, which will be unable to "feed on" by any of the reasons, will simply break down, and passages or channels will occur in the multi-layer system. So the first multi-layer pipes - worms are formed, and the animate nature evolutionary process starts.

Principles of evolutionary development of the animate nature in the parallel worlds will be considered in the item " Planets and Satellites ".

Principles of the star evolution will be considered in the item " Galaxies ".

WRITE LETTER TO AUTHOR

Back

---

NEW ARTICLES AND PUBLICATIONS
	The technology of manufacturing universal couplings for unbreakable, threadless, flossless connection of pipe sections in high pressure pipelines (video is available )
	Technology of oil and oil products cleaning
	On the possibility of moving a closed mechanical system at the expense of internal forces
	Fluorescence in thin dielectric channels
	The relationship between quantum and classical mechanics
	Millimeter waves in medicine. A New Look. MMV therapy
	Magnetic engine
	Heat source based on pump units

---

Liked? Subscribe to RSS news!
You can also support shram.kiev.ua, press:

It will not be superfluous for your friends to learn this information, share their article with them!

Expand / Collapse

Comments

When commenting on, remember that the content and tone of your message can hurt the feelings of real people, show respect and tolerance to your interlocutors even if you do not share their opinion, your behavior in the conditions of freedom of expression and anonymity provided by the Internet, changes Not only virtual, but also the real world. All comments are hidden from the index, spam is controlled.