Navigation: =>

Home / Forum Index / Contents sub /

Latest Inventions. New types of engines based on new physical and technical principles WORK

Inertial Propulsion Device B. Senkevich

Vitaly Sienkiewicz

The body is at rest or is moving in a straight line and
evenly until it is not an external force acts.
(At school, I was taught)

Forget everything you've been taught in school.
(Arkady Raikin)

Mover comprises a motor and housing. Figure 1. The engine is characterized in that the stator (C) it is made movable and has the ability, as well as the rotor (R), rotate freely. When the engine is turned on stator and rotor begin to rotate in opposite directions. Thus, the engine has two outputs. To one of the engine output is connected a flywheel (M), which acceleration starts rotating.

Retractable thruster V.Senkevicha

The second output of the engine is connected rocker (K) which, under the influence of the torque occurring at the second output of the motor, presses on one of the abutments (U1 assume). The stops are located on the housing. As a result, the palm there is a force that is compensated by the acceleration of the flywheel (M). When you reach a certain speed flywheel control system (CS) switches the motor windings so that the direction is reversed (reverse). At the same time the rocker and aims to turn the other way and the pressure on the second stop (U2). And the cycle repeats. It should be noted that the forces acting on the stops in one direction and move the entire device.

print version
Author: Vitaly Sienkiewicz
PS material is protected