Фізіологія і психологія праці - Krushelnytska Ya.V.

Вибір робочої пози

At rozv'yazannny practical zavdan shodo ratsionalizatsii rabochoї posi nehhіdno vrachovuvaty soi fiziologichnyi vimogi :

  • Зменшува статичні напруження м'язів;
  • Rozpodіляти статичні напруження so, Щоб основна їх частина припала на потужніші м'язи;
  • Bіlshe vikoristovuvati robochy posy sitichi ta zmіnnu.

One of the vibes of the robotic position is to lie in the baggy factors, the vrachuvannya of the ich vichnachaet її ratsionalnist in concrete vibrochnichih umovah. The main of them - the mass of obrobljuvannya details, zusilya, rozmіri robochoї zony, spіvvіdnoshennya mizh vysotoyu rostochoi poverhnі і зростом працівника, exactness of ruchіv, osoblivostі labor process, yakі zumovlyuyut ruchlіvist pid hour roboty.

So, robotics, yaki vimagayut znachnih m'yazovy zusil і rukhiv with great amplitude, shvidshe vikonuyutsya stand up. For a small range of ruchs, small prisms and accurate dili bilsh dotsilnaya pose sessile (Table 3.1).

Table 3.1

CRITERA FOR VIBOR ROBOTIC POSITION

Robotic pose

Zusilla, kgf

Ruchlivist rule

Розмір (радіус) робочої зони (mm), mm

Sitting

Up to 5

Mixed

380-500

Змінна

5 ... 10

Serednja

380-500

Standing

10 ... 20

Great

750 and more

At times, the service of a standing robot stands up to the robot with a light weight to the forward body.

Kut nahilu is not guilty of overhauling 10-15 °, the incineration of a bulwark nahilі zrostayut statichna napruzhennya. Optimal rozmіri robotschoy zony with ts'omu to become: for vysotoyu - 1000-1600 mm; Behind the front -550 mm; For the glibino - 350 mm. For pratsivnik, yaky vikonuє robot stand, slіd takozh perebachiti on robochomu mіtsіі sidіnnya for short-term vidpochinku pіd hour pererv at robotі.

The grip of the robot posing is sedentary, optimized for the sake of the glyphine of the robotic surface, in the open space for nig, for arms, and for adjusting the back of the seat for the person. Ratsionalno proektovane rosočche krіsl stvoi опоu podoru for hull pratsіvnika, zabezpechuet dostatnu ruchlivist 'u robotі і rіvnіnіnyi rozpodіl mashi tіla. Optimal rozmіri robotscho zoni in roboti sitting: for the height - 600-1200 mm; For the glibino - 500 mm; Behind the front - 500 mm from the center of the seat. Якщо працівник виконує дрібні і точні рухи з нечним зусиллями (up to 1 kg), then the robot zone is responsible for the mother at the time - 800-1000 mm, behind the front - 500 mm; For the glibine - 200-400 mm from the center of the sidenna. Простір для розміщення ніг працівника is characterized by such vimіry: height - not less than 600 mm, width - 500-600 mm and glibin - 450-550 mm.

Фізіологічна оцінка робочої пози враховує також і положення рук у процесі праці. By science it is established, it is nosyatjudlivshi umovi for roboti m'yaziv, bloody stvoamyayutsya Todi, if kut vidvedennya i kut zginannya in the shoulder zedenanni become 5-15 °, and kut zginennya y liktovomu zedenanni 70-90 °. Tse means that the robot has to be turned on in large-scale designs and extensively extended by hand. The yak is unarmed, understaffed, tampered with the great costs of energy.

Naybilsh dotsilnoyu v fiziologichnogo boku є zmіnna pose stoyachi-siticha, yaka zabezpechuє menshu vtomu pratsіvnika zv'yazku z cherguvanannyam navantazhen 'on riznі grupi m'yaziv. The height of the robotic surface in the water flow is 950-1050 mm, and the zone of robotics behind the front and behind the glibino is located in the robotic zone in the robotic pose of the sedentary.

Зміна робочих поз perebacha neobhіdnість дотримання таких вимог:

  • Зберігати однакове положення працівника відносно робочої поверхні;
  • Zabezpechuvati novoi kut zoru i rozmizchennnia hands;
  • Stvoryovati neobhіdnі umovi for the transition from one position to another.

For zmenshennya static navantazhen neobhidno:

  • Obmezhiti up to the minimum vikonannya robot in the non-armory of the building and kintsivok;
  • Viklyuchi trivale vikonannya robot in pozhennі, if the hands rozvedeni in the sides, pidnyatі vgoru, vityagnuti forward;
  • Obmezhiti hour utriannya innstrumentu, materialov, rescheduled vtantazhu;
  • Obmezhiti hour nebruhomogo poslovnya in the process of vikonannya robot abo with povylnyh robokhy ruhah.